25 Layers Hydraulic Plywood Veneer Hot Press
1. 25 Layers Plywood hot press introduction:
Hot press belongs to plywood making machine, so it is for plywood production. The function of hot press is pressing plywood board, make the end pressed plywood be strong and solid, so it can be used to be different application like construction, decoration, furniture, packing, and others.
This is 25 layers hot press machine, so it can press 25 pcs plywood board one time, when the layers more than 20, hot press machine frame should be stronger to keep stable. For our hot press machine, we use good and thick steel material, to make its body heavy and strong, to undertake high pressure. And we choose good spare parts like oil cylinders, hydraulic station, good hot plates and other parts, make sure the whole set hot press is good enough.
Hot press can be different layers and pressure as you want. And hot press can be produced as your plywood size.
2. 3 D drawing of Plywood hot press
3. Plywood hot press at our clients factory
These are multi-layer hot press machine at our clients factory, when the hot press machine's layers more than 20, we advise that the hot press equipped with automatic loading and unloading system directly. Because when the hot press layers more, it will waste much more time by manual infeeding. So with the automatic loading and unloading system, the whole press process, it is automatic, from the beginning-automatic infeed plywood into hot press machine, after pressed, automatic outfeeding plywood and stacking plywood, high efficiency and improve your production capacity, and save labor cost.
4. Mainly parts of 25 layers hot press
When the hot press machine layers become more, it is not just easy to increase its layers, when its layers increase, the whole press machine's production technique will be more complex and strict, because when its layers become more, the whole hot press machine will be higher a lot, so its stability must be good enough, to keep stable during the whole working. Also at the same time, keep plywood quality good.
Our factory has been in this industry more than 30 years, we have rich experience and advanced production technique and equipments, and experienced workers and engineers, make sure the whole hot press production process is strictly make according to high level.
So until now, all of our clients have good feedback for our plywood press machine.
5. Specification of 25 layers Hot press machine
| Machine name |
Hot press machine |
| Layers |
25 |
| Hot plates quantity |
26pcs |
| Hot plates size |
2700*1370*52mm |
| Distance between each plates |
80mm |
| Pressure |
800ton |
| Oil cylinder |
Dia 320mm *4pcs |
| Weight |
50 ton |
Note: The layers, pressure, size and other specification, all can be produced as your own conditions and requires.
6. Loading pictures of Plywood machinery
7. Related Plywood Machinery
These is Plywood cold press machine for pre-pressing plywood, and veneer gluing machine for coating glue on veneer surface. They also the necessary machine for making plywood.
Please directlly send message to us, we will reply you quickly.
){kind=link}
){kind=link}