China MINGHUNG PB /MDF /HDF /OSB /Plywood Production Machine
Wood Based Panel
Wood-based panel is a kind of board made by manual processing, usually made of wood or other plant fiber materials by gluing, pressing and other processes. Common types of wood-based panels include:
1. Plywood: made of multi-layer thin wood, high strength, not easy to deformation.
2. particleboard: made of wood shavings and adhesives mixed and pressed, often used in furniture manufacturing.
3. Fiberboard: divided into medium density fiberboard (MDF) and high density fiberboard (HDF), made of wood fiber and adhesive pressing, smooth surface, easy to process.
4. Joinery board: composed of wooden strips spliced into a core board, both sides covered with thin wood, high strength, often used in furniture and construction.
5. Oriented particleboard (OSB) : made of oriented wood chips and adhesive pressing, often used in building structures.
Wood-based panels are widely used in furniture, construction, packaging and other fields, with low cost, high utilization rate, environmental protection and other advantages.
Now i will introduce what machines are required for making these wood based panel
Plywood Production Line
Plywood production line is a complete set of equipment and workflow for processing logs into plywood. The following are the main steps and equipment of the plywood production line:
1. Log handling
- Equipment: Log cutting saw
- Process: The logs are peeled and cut to the required length.
2. Debarking and peeling
- Equipment: Rotary debarking peeling and cutting machine
- Process: Cut raw wood into veneer or slice into thin wood.
3. Veneer drying
- Equipment: Dryer
- Process: Dry the wet veneer to a suitable moisture content.
4. Board finishing
- Equipment: cutting machine, splicing machine
- Process: Cut boards to the required size and splice small boards.
5. Glue
- Equipment: gluing machine
- Process: Evenly apply glue to the surface of the board.
6. Prepressing and hot pressing
- Equipment: pre-press, hot press
- Process: prepress preliminary setting, hot pressing to solidify the adhesive.
8. Trim
- Equipment: cooling rack, edge cutting machine
- Process: Cut edge to standard size after cooling.
9. Sanding and inspection
- Equipment: Sander
- Process: sand the surface, check the quality and grade.
10. Packing and warehousing
- Equipment: Packaging machine
- Process: storage after packaging.
Particle board Production Line
Particleboard production line is a complete set of equipment and workflow for processing wood or other plant fiber materials into particleboard. The following are the main steps and equipment of particleboard production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Dry
- Equipment: Dryer
- Process: Dry the wet shavings to the appropriate moisture content.
3. Screening and sorting
- Equipment: Screening machine
- Process: Screen shavings according to size and remove unqualified parts.
4. Mix glue
- Equipment: glue mixer
- Process: Evenly mix the shavings with the adhesive.
5. Paving
- Equipment: paving machine
- Process: The mixed rubber shavings are evenly paved into slabs.
6. Preload
- Equipment : prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form particleboard.
8. Cool down
- Equipment: Cooling rack
- Process: Cooling the particleboard after hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
OSB Production LIne
Oriented strand board (OSB) production line is a complete set of equipment and workflow for processing wood into oriented strand board. The following are the main steps and equipment of the OSB production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Dry
- Equipment: Dryer
- Process: Dry the wet shavings to the appropriate moisture content.
3. Screening and sorting
- Equipment: Screening machine
- Process: Screen shavings according to size and remove unqualified parts.
4. Mix glue
- Equipment: glue mixer
- Process: Evenly mix the shavings with the adhesive.
5. Directional paving
- Equipment: directional paving machine
- Process: The mixed rubber shavings are paved into slabs in a specific direction.
6. Preload
- Equipment: prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form directional particleboard.
8. Cool down
- Equipment: Cooling rack
- Process: Directional particleboard after cooling and hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
MDF Production Line
Medium density fiberboard (MDF) production line is a complete set of equipment and workflow for processing wood or other plant fiber materials into MDF. The following are the main steps and equipment of the MDF production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Fiber separation
- Equipment: Hot mill
- Process: Wood chips are separated into fibers by a hot mill.
3. Dry
- Equipment: Dryer
- Process: Dry the wet fiber to the appropriate moisture content.
4. Mix glue
- Equipment: glue mixer
- Process: Mix the fiber and adhesive evenly.
5. Paving
- Equipment: paving machine
- Process: The mixed rubber fiber is evenly paved into slabs.
6. Preload
- Equipment: prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form medium density fiberboard.
8. Cool down
- Equipment: Cooling rack
- Process: MDF after cooling and hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
Specification
| Name |
OSB making machine |
PB making machine |
MDF making machine |
Plywood making machine |
| Final panel |
OSB board |
Chipboard |
Medium density fiberboard |
Plywood |
| Size |
1220*2440mm or customized |
1220*2440mm or customized |
1220*2440mm or customized |
1220*2440mm or customized |
| Capacity |
100-1000m3/day |
100-1000m3/day |
100-1000m3/day |
30-200m2/day |
| Thickness |
6-25mm |
6-25mm |
3-9mm /10-40mm |
18mm |
As different capacity and other requires, we can offer the suitable quotation for you
If you want to produce these wooden panel, welcome contact us for more information about these machine
Audited Supplier 
){kind=link}