Veneer drying technology veneer dryer
Veneer drying technology
Veneer mesh dryer
Its convey veneer way by stainless steel mesh, or also can be galvanized wire, but usually we advise directly choose the stainless steel wire.
Veneer roller dryer
Its convey veneer way by rollers, so usually the veneer thickness should not too thin
Veneer mesh dryer and veneer roller dryer, they are very similar except the convey way. they all can be customized to be different dryer width, floors and sections, to satisfy different drying capacity according to the veneer species, thickness, original humidity and other factors.
For our veneer drying technology, we are confident to say that all its material and parts are good type
Upgraded electric box with air-conditioner
Thick door with good thermal insulation
All spare parts are good type
Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are: 1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss. 2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack. 3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.
MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618 : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.
If you want good quality veneer drying machine, welcome contact us
){kind=link}