Plywood Veneer Core Roller Dryer for Veneer Papel Drying Technology
Veneer drying is a very important link in the production process of plywood. The moisture content of veneer is too high, or the moisture content of veneer is uneven, which directly affects the production quality of plywood. Usually, the moisture content of veneer is required to be %8-%14 , the moisture content of the veneer in this interval is the most reasonable for the quality of the plywood veneer, so a veneer dryer is required to complete the veneer drying. The selection of the veneer dryer needs to provide us with several data to ensure that we provide the best solution:
1. What is the thickness of the veneer?
2. What is the throughput for 10 hours?
3. What is the moisture content of the veneer?
4. The name of the tree for the veneer?
5. Is the heating boiler heat transfer oil or steam? Etc.,
MINGHUNG MH-304HL MH-RD model dryer, providing energy-saving and efficient veneer drying solutions.
The veneers move through the drying machine in several layers along rollers, as the machine's name indicates. The target moisture level after drying is around 6-7% which is precisely the right moisture level for gluing veneer.
A sufficient drying temperature is 145-160ºC and the veneers pass through the machine in about six minutes. Drying conditions and the moisture of the veneers are monitored continuously to make sure that the drying quality remains even.
Usually, the original moisture is 70-80%, after drying, the moisture is about 10%
product description:
Product advantages: This equipment has a high degree of automation, low operating cost, small footprint, and can be operated 24 hours a day, saving labor, and the annual labor cost saving can reach 150,000 US dollars.
Obvious features:
1. High degree of automation, automatic loading, labor saving, automatic heating, dehumidification, high drying intensity, long drying time, high moisture saturation, and energy saving.
2. Dry evenly. The peeled veneer undergoes heat exchange and moisture removal in multiple sections, and after drying for about 1.5 hours, the moisture content is low and uniform, which can meet the production needs of veneer and plywood.
3. The output is large. According to the needs of different users and different materials, the output of the equipment can reach 1---5 cubic meters/H.
4. The equipment adopts fin-type heating device, which has large heat exchange area, fast temperature increase, large circulating air volume, many cycles, high heat exchange efficiency, high exhaust water saturation, energy saving, and low use cost, which is better than roller type veneer. The drying equipment saves energy by more than 40% (the roller adopts the air spray method, the contact time between the hot air and the plate is short, and the heat exchange efficiency is low).
5. A piece of equipment investment can be used for more than ten years, super cost-effective
6. The failure rate is low, the network belt is worn, and the network is disconnected, and the failure rate of the pallet is low.
7. The equipment adopts vertical plate loading and drying. The operation time of the plate skin in the equipment is long, which can reach 1-2 hours. The temperature can be controlled according to the section. 13----15min, the folding type veneer dryer has large output, low energy consumption and low drying cost.
>>>Parameters:
The dryer machine-Roller dryer, can be different layers, length and width, so we usually offer and produce according to your production capacity required.
| Name |
Roller dryer |
| Model |
MH-RD |
| Heating mode |
Steam/Oil |
| Veneer thickness |
1-3mm |
| Transport mode |
Roller press mode |
| Speed |
Speed adjustable |
| Number of layers |
2 layers/3layers/4layers |
| Length of hot wind area |
20m/26m/30m/32m |
| Peoduction capacity |
20-30m³/day, 30-40m3/day, 100m3/day |
>>>Main Parts:
<1> Resonable design and good parts make roller dryer save energy and transfer heating fast.
<2> The dryer machine uses the latest ultra-low noise centrifugal ventilator, reduce noise, good for workers.
<3> The wind speed is faster and the air volume is higher, therefore the drying speed is much quicker.
<4> Adopt variable frequency speed control, can adjust feed speed according your veneer thickness and moisture content, to get perfect drying effect.
>>>Roller Dryer at Clients Factory:
The installation of veneer roller dryer is more complex and spend longer time than others, so our engineer will go to install with your workers.
>>>Roller Dryer Delivery:
Before deliver roll dryer from our factory, we will test several sections of dryer, to ensure our dryer quality are in good conditions.
After disassmbly, our workers will packing each kind of parts, and make the number marks, for client easy to know whats the function and what they are.
When dryer delivered, we will give the dryer drawings to you for make foundation, and assembly drawing.
>>> Our factory CE certificate:
>>> Other our Plywood machine
Our factory produce the full line of plywood veneer machine, from material-wood log, to the end product-plywood board, we manufacture all these machines.
They mainly include: Veneer production line(wood debarker, log peeling machine, log conveyor, and vacuum veneer stacker), Veneer dryer( Roller dryer, Mesh/Wire dryer, Press dryer), Glue spreader, Cold press machine, Hot press machine, Plywood Trimming machine, Sanding Machine, Lift table.
Each machine has different specification and types according to different clients requires, we will offer the suitable and strong peeling machine according to your own conditions and requires.
Welcome contact us for more information of Roll dryer and Mesh dryer and other plywood machine. we have the ability to offer you strong and suitable dryer to you.
){kind=link}