Beech Bucks Veneer Dryer for Veneer Plywood Production

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: MH-RD40L
• Movement Way: Continuous Drying
• Heating Mode: Boiler
• Material Status: Wood Bucks
• Drying Medium: Superheated Steam, Air
• Operation Pressure: None
• Type: Multistage
• Transport Package: Plastic Film and Wooden Box
• Specification: 40*7*5 m
• Trademark: MINGHUNG
• Origin: China
• HS Code: 841939
• Production Capacity: 2000sets/Year
• Package Size: 4000.00cm * 700.00cm * 500.00cm
• Package Gross Weight: 95000.000kg

Product Description

                     Beech bucks Veneer Dryer for veneer plywood production

 

 

 
Vertical veneer dryer

Beech veneer is light yellow, with clear texture and uniform texture. The density of beech is generally about 790kg/m³, and the hardness is about 5800N. The rear beech veneer has a smoother surface. Because it is cooking, the moisture content reaches %50-%60, and the moisture content is relatively high. If the moisture content of the veneer after drying reaches %0-%14, it takes about 10 minutes, so if the output of beech veneer drying is If there are requirements, special optimization of the dryer is required. MINGHUNG MH-RD2830L; MH-RD304HL These two models are veneer drying equipment optimized for beech veneer. For details, please contact us.

Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are:

1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss.

2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack.

3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.


MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618  : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.

Good spare parts and components:

With good parts and accessories, like the electric box, big fan, radiator, thermal insulation door, bearings and others. We can say that all materials of our dryer are good type. That's is why we are confident to say that our dryer is better. 


Share some loading pictures with you:

Please contact us without any hesitation if you are interested in our veneer dryer machine.