Continuous Mesh Belt Veneer Dryer
birch veneer drying
The air-dry density of birch is 0.59 ~ 0.72g/cm3, that is, the specific gravity is 0.59 ~ 0.72. Usually, before the birch veneer is peeled, it is necessary to cook the birch, so that the surface of the birch veneer after peeling is smoother and the moisture content reaches %50-%60, the moisture content is high, if the moisture content of the veneer after drying reaches %0-%14, it will take about 10 minutes, so if there is a requirement for the output of birch veneer drying, it is necessary to The dryer is specially optimized, MINGHUNG MH-RD2830L; MH-RD304HL These two models are veneer drying equipment developed and optimized for birch veneer drying, please contact us for details.
The veneers move through the drying machine in several layers along mesh belt, as the machine's name indicates. The target moisture level after drying is around 5-14% which is precisely the right moisture level for gluing veneer.
A sufficient drying temperature is 145-160ºC and the veneers pass through the machine in about six minutes. Drying conditions and the moisture of the veneers are monitored continuously to make sure that the drying quality remains even.
Usually, the original moisture is 70-80%, after drying, the moisture is about 10%
For our veneer mesh dryer, with years of production experience, and continuous to improve it, and insist use good materials, our dryer quality has become better and better. And our dryer has been recognized by many clients. Our dryer machine can help you drying veneer moisture as required and keep your dryed veneer good quality.
| Name |
Mesh belt veneer dryer |
| Decks |
4 |
| Width |
4500mm |
| Heating area |
9 |
| Cooling area |
1 |
| Drying capacity |
50m3 |
| Weight |
100 ton |
Welcome contact us for more information of veneer dryer
){kind=link}