Wood Based Panel Plywood /Particleboard Particle Board /Chipboard /OSB /MDF /HDF Production Line
Wood Based Panel
Wood-based panel is a kind of board made by manual processing, usually made of wood or other plant fiber materials by gluing, pressing and other processes. Common types of wood-based panels include:
1. Plywood: made of multi-layer thin wood, high strength, not easy to deformation.
2. particleboard: made of wood shavings and adhesives mixed and pressed, often used in furniture manufacturing.
3. Fiberboard: divided into medium density fiberboard (MDF) and high density fiberboard (HDF), made of wood fiber and adhesive pressing, smooth surface, easy to process.
4. Joinery board: composed of wooden strips spliced into a core board, both sides covered with thin wood, high strength, often used in furniture and construction.
5. Oriented particleboard (OSB) : made of oriented wood chips and adhesive pressing, often used in building structures.
Wood-based panels are widely used in furniture, construction, packaging and other fields, with low cost, high utilization rate, environmental protection and other advantages.
Now i will introduce what machines are required for making these wood based panel
Plywood Production Line
Plywood production line is a complete set of equipment and workflow for processing logs into plywood. The following are the main steps and equipment of the plywood production line:
1. Log handling
- Equipment: Log cutting saw
- Process: The logs are peeled and cut to the required length.
2. Debarking and peeling
- Equipment: Rotary debarking peeling and cutting machine
- Process: Cut raw wood into veneer or slice into thin wood.
3. Veneer drying
- Equipment: Dryer
- Process: Dry the wet veneer to a suitable moisture content.
4. Board finishing
- Equipment: cutting machine, splicing machine
- Process: Cut boards to the required size and splice small boards.
5. Glue
- Equipment: gluing machine
- Process: Evenly apply glue to the surface of the board.
6. Prepressing and hot pressing
- Equipment: pre-press, hot press
- Process: prepress preliminary setting, hot pressing to solidify the adhesive.
8. Trim
- Equipment: cooling rack, edge cutting machine
- Process: Cut edge to standard size after cooling.
9. Sanding and inspection
- Equipment: Sander
- Process: sand the surface, check the quality and grade.
10. Packing and warehousing
- Equipment: Packaging machine
- Process: storage after packaging.
Particle board Production Line
Particleboard production line is a complete set of equipment and workflow for processing wood or other plant fiber materials into particleboard. The following are the main steps and equipment of particleboard production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Dry
- Equipment: Dryer
- Process: Dry the wet shavings to the appropriate moisture content.
3. Screening and sorting
- Equipment: Screening machine
- Process: Screen shavings according to size and remove unqualified parts.
4. Mix glue
- Equipment: glue mixer
- Process: Evenly mix the shavings with the adhesive.
5. Paving
- Equipment: paving machine
- Process: The mixed rubber shavings are evenly paved into slabs.
6. Preload
- Equipment : prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form particleboard.
8. Cool down
- Equipment: Cooling rack
- Process: Cooling the particleboard after hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
OSB Production LIne
Oriented strand board (OSB) production line is a complete set of equipment and workflow for processing wood into oriented strand board. The following are the main steps and equipment of the OSB production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Dry
- Equipment: Dryer
- Process: Dry the wet shavings to the appropriate moisture content.
3. Screening and sorting
- Equipment: Screening machine
- Process: Screen shavings according to size and remove unqualified parts.
4. Mix glue
- Equipment: glue mixer
- Process: Evenly mix the shavings with the adhesive.
5. Directional paving
- Equipment: directional paving machine
- Process: The mixed rubber shavings are paved into slabs in a specific direction.
6. Preload
- Equipment: prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form directional particleboard.
8. Cool down
- Equipment: Cooling rack
- Process: Directional particleboard after cooling and hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
MDF Production Line
Medium density fiberboard (MDF) production line is a complete set of equipment and workflow for processing wood or other plant fiber materials into MDF. The following are the main steps and equipment of the MDF production line:
1. Raw material preparation
- Equipment: chipper, planer
- Process: Cut the wood into small pieces or shavings.
2. Fiber separation
- Equipment: Hot mill
- Process: Wood chips are separated into fibers by a hot mill.
3. Dry
- Equipment: Dryer
- Process: Dry the wet fiber to the appropriate moisture content.
4. Mix glue
- Equipment: glue mixer
- Process: Mix the fiber and adhesive evenly.
5. Paving
- Equipment: paving machine
- Process: The mixed rubber fiber is evenly paved into slabs.
6. Preload
- Equipment: prepress
- Process: Initial compaction of the slab, convenient for subsequent hot pressing.
7. Hot press
- Equipment: Hot press
- Process: The adhesive is cured under high temperature and pressure to form medium density fiberboard.
8. Cool down
- Equipment: Cooling rack
- Process: MDF after cooling and hot pressing.
9. Edging and sanding
- Equipment: Edge cutting machine, sanding machine
- Process: Edge cut to standard size, sanded surface.
10. Inspection and packaging
- Equipment: Inspection equipment, packaging machine
- Process: Check the quality and grade, pack and store.
If you want to produce these wooden panel, welcome contact us for more information about these machine
Audited Supplier 
){kind=link}