Veneer Drying Machine for Fine Composite Wood Veneer

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: MH-RD304HL
• Movement Way: Continuous
• Heating Mode: Connect with Boiler
• Material Status: Peeled Wood Papel
• Drying Medium: Superheated Steam, Air
• Operation Pressure: None
• Drum Number: Wire
• Type: Drying Machine
• Name: Roller Veneer Drying Machine
• Decks: 3
• Width: 2800mm
• Heating Sections: 12
• Cooling Sections: 2
• Conveyor Way: Wire
• Wire Type: Stainless Steel Wire
• Veneer Thickness: 1-3mm
• Veneer Original Humidity: 50%-70%
• End Humidity: 5%-10%
• Dryer Weight: 65 Ton
• Transport Package: Plastic Film and Wooden Packing
• Specification: 40 * 5 *3.5 m
• Trademark: MINGHUNG
• Origin: China
• HS Code: 841939
• Production Capacity: 1000sets/Year
• Package Size: 4000.00cm * 500.00cm * 350.00cm
• Package Gross Weight: 65000.000kg

Product Description

 

                                      Veneer Drying Machine for fine composite wood veneer

 

 

Veneer drying is a very important link in the production process of plywood. The moisture content of veneer is too high, or the moisture content of veneer is uneven, which directly affects the production quality of plywood. Usually, the moisture content of veneer is required to be %8-%14 , the moisture content of the veneer in this interval is the most reasonable for the quality of the plywood veneer, so a veneer dryer is required to complete the veneer drying. The selection of the veneer dryer needs to provide us with several data to ensure that we provide the best solution:  

During the veneer drying process, a large amount of steam will be generated inside the dryer. If the steam cannot be discharged in time, it will affect the veneer drying efficiency and reduce the output of veneer drying.

MINGHUNG patented automatic control veneer drying moisture removal system, the whole The machine is controlled by computer PLC. According to the water vapor generated in the drying process of different veneers, automatic detection and automatic moisture removal are carried out.

There are a variety of sensing devices inside the veneer dryer, which convert the detection data into computer signals, and convert the computer signals into PLC signals. control.

The advantage of this design is precise moisture removal, automatic processing according to the dry humidity inside the veneer dryer, and avoiding the loss of energy inside the veneer dryer. Energy is saved and thermal efficiency is improved.

 

 

Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are:

1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss.

2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack.

3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.


MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618  : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.

Good spare parts of our veneer drying machine:

Until now, all clients who use our veneer drying machine, all feedback the materials very good, we are happy to hear that they can know this. 
We not pursue low price, we only pursue high quality. 


Share some loading pictures of our drying machine with you:

Although install one set drying machine will spend us some time and labor cost, but for be responsible to each our clients, before loading your dryer, first we will assembly and test it, check its working conditions and all parts are good and suitable.  Until we make sure your dryer is good, we will disassembly and packing and loading. 


WHO WE ARE?

We are China manufacturer and supplier of veneer machine and plywood machine, from the wood material to the end product veneer, plywood, wooden furniture, we can offer you the suitable machine for help you start this business, and help you produce good quality product. 
Machines like veneer production line, veneer drying line, veneer glue machine, core composing line, plywood lay up machine, plywood pre press machine, hot heating press machine, plywood edge trimming saw, sanding machine, lift table, veneer patching machine, plywood overturn machine and so on
And each machine can be different specification to suitable for different clients requires

If you have any demands, welcome contact us
You will be surprised and satisfied work with us